Swedish fibre optic builder VXFIBER, which is currently working to deploy a new 1Gbps open access FTTP broadband ISP network across Stoke-on-Trent in Staffordshire (here), has today published a new ‘Digital Masterplan‘ to assist other UK Local Authorities in their plans for rolling out similar infrastructure.
The plan essentially highlights 9 sequential stages for a local body to consider in its installation and roll-out plans for a prospective network. Furthermore it encourages local authorities to “properly invest in full fibre to the home (FTTH) Gigabit connectivity” instead of “continuing to invest millions in hybrid copper / fibre technologies, which will only be suitable for a few more years.”
VXFIBER’s Head of Business Development, Richard Watts, said: “Local Authorities are the custodians of the UK’s regional economic and social development. They have responsibility for a broad range of issues … [and] a local authority’s development plans must have a properly thought-out digital strategy to support [that].”
The announcement states that VXFIBER’s Digital Masterplan is available to download here (PDF), although at the time of writing this only appears to consist of a single page with the headings for each stage and no further details. Luckily we have been able to extract a few more details from elsewhere but there isn’t a lot of detail, although some may still find it useful.
VXFIBER’s Digital Masterplan
STAGE 1 – Digital vision
This is about the authority’s social, economic and environmental ambitions for its region. What initiatives does it want to launch? What new opportunities does it want to create? This can include a range of subjects:
– Building affordable housing for residents
– Regional job creation
– Attracting inward investment for a new enterprise zone
– Encouraging local start-ups
The local authority’s digital vision should also include what new public services it wants to put in place – such as publicly available WiFi zones, IoT-based Smart city features for traffic management or better energy efficiency. With this vision in place for the short, medium and long-term future, the local authority can consider how to bring it to life – and what connectivity it needs to do so.
STAGE 2 – Existing duct assets
The next step is to identify the existing ducts and pipes that the local authority already has in place and which it can potentially use for rolling out a full-fibre network. These could be pipes for a local CCTV network, sewers or utility pipes. Physically installing fibre infrastructure is the most expensive part of a fibre rollout. Digging up the road to install fibre is time consuming and eats up to 80 percent of the installation’s total cost. Using existing assets wherever possible – including unused “dark fibre” – is critical for minimising cost.
STAGE 3 – Backhaul connectivity
Next, the local council or authority must align the ducts and pipes it has at its disposal with the nearest middle mile and core backhaul networks. Middle mile networks need to be connected to the UK’s nationwide fibre infrastructure. Any full fibre infrastructure planned by the authority must be able to connect to this nationwide network in order to connect to the internet.
By bringing these assets together, the local authority can assess if it or its partners needs to dig new routes and install extra fibre to enable network: and if so, where it needs to do so.
STAGE 4 – Local plan
This identifies the physical position of any major new development projects for the future – whether new residential housing: science parks: or regenerating an existing district.
Previously, the local authority’s strategic focus has always been “above ground”. But rolling out a full fibre broadband network means it now needs to extend its strategy “below ground” as well, in a way that aligns with its plans on the surface. Any planned Gigabit fibre network has to correspond with and connect the proposed new development sites. By aligning these locations with its digital masterplan, the local authority has a clear view of precisely which areas its new full fibre network needs to reach.
STAGE 5 – Road works, new roads, rail: & Stage 6 – Energy projects
These two levels factor in existing and future physical infrastructure plans, be it the construction of new roads or repairs to existing roads: or alternatively, the construction of a distributed heating network or the presence of electricity pylons.
A local authority can use the construction of or maintenance on a physical road, energy or utility network as the perfect opportunity to install Gigabit fibre at the same time. Doing so saves time and money on the fibre installation process.
STAGE 7 – Map premises data
Mapping the premises of the area to be served by the planned new network means the local authority can identify key locations that need connectivity. These include residential areas (both private and social housing), business parks and enterprise zones, plus public locations like schools and hospitals (as well as the authority’s own offices). Plotting them is an important step in planning the scale and reach of the planned network.
STAGE 8 – Major land ownership
Major land owners – whether inner city landlords or rural farmers – have a critical part to play in network rollout. Their private land might be the key to unlocking connected access to remote rural communities, new urban developments or under-served inner city sites.
What’s essential is a collaborative approach to fibre ownership with a “dig once” startegy that benefits all infrastructure owners – whether public sector or private owner.
STAGE 9 – Map broadband availability
Mapping current broadband coverage and availability identifies, firstly, those areas that are under-served and in desperate need of connectivity: and also those areas with an especially high level of demand, such as hospitals, university campuses, science parks and enterprise hubs.
By identifying these areas in advance, the local authority can anticipate demand and traffic levels and incorporate them into its planned network.